<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/">
	<channel>
		<title>انجمن تخصصی الکترونیک و رباتیک ایران مدار - تمام انجمن ها</title>
		<link>http://forum.iranmedar.com/</link>
		<description>انجمن تخصصی الکترونیک و رباتیک ایران مدار - http://forum.iranmedar.com</description>
		<pubDate>Thu, 24 Jul 2008 21:49:24 +0400</pubDate>
		<generator>MyBB</generator>
		<item>
			<title>Power Archiver 2007 برنامه ای عالی برای فشرده سازی تمام فرمت ها</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=117</link>
			<pubDate>Wed, 23 Jul 2008 07:34:48 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=117</guid>
			<description><![CDATA[[center]این برنامه قابلیت داره تمامه فرمت هارو  فشرده سازی کنه خیلی برنامه عالی حتمآ دانلود کنید



دانلود Power Archiver 2007 برنامه ای عالی برای فشرده سازی تمام فرمت ها[/center]]]></description>
			<content:encoded><![CDATA[[center]این برنامه قابلیت داره تمامه فرمت هارو  فشرده سازی کنه خیلی برنامه عالی حتمآ دانلود کنید



دانلود Power Archiver 2007 برنامه ای عالی برای فشرده سازی تمام فرمت ها[/center]]]></content:encoded>
		</item>
		<item>
			<title>آي سي L6201PS ويا L6203</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=116</link>
			<pubDate>Mon, 21 Jul 2008 12:33:59 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=116</guid>
			<description><![CDATA[با سلام
لطفاً اگر كسي در مورد آي سي L6201PS ويا L6203 اطلاعات و مداري داره براي من بفرسته .  متشكرم]]></description>
			<content:encoded><![CDATA[با سلام
لطفاً اگر كسي در مورد آي سي L6201PS ويا L6203 اطلاعات و مداري داره براي من بفرسته .  متشكرم]]></content:encoded>
		</item>
		<item>
			<title>نرم افزار ها و اسکریپت های جدید همراه با کرک</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=115</link>
			<pubDate>Sun, 20 Jul 2008 02:45:57 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=115</guid>
			<description><![CDATA[سلام
اگر دنبال برنامه هاي جديد و زيبا براي کارهاي گرافيکي ميگردين يه سر به اينجا بزنين
نرم افزار فرهنگ لغت
نرم افزار قالب وبلاگ
نرم افزار مبدل فرمت
نرم افزار نوشتن
نرم افزار ويندوز
نرم افزار ياهو مسنجر
نرم افزار آنتي ويروس
نرم افزار امنيت
نرم افزار بازي
نرم افزار صوتي و تصويري
نرم افزار آموزشي
نرم افزار موبايل
نرم افزار دانلود
نرم افزار طراحي عکس
All In  http:///www.ir-softs.com]]></description>
			<content:encoded><![CDATA[سلام
اگر دنبال برنامه هاي جديد و زيبا براي کارهاي گرافيکي ميگردين يه سر به اينجا بزنين
نرم افزار فرهنگ لغت
نرم افزار قالب وبلاگ
نرم افزار مبدل فرمت
نرم افزار نوشتن
نرم افزار ويندوز
نرم افزار ياهو مسنجر
نرم افزار آنتي ويروس
نرم افزار امنيت
نرم افزار بازي
نرم افزار صوتي و تصويري
نرم افزار آموزشي
نرم افزار موبايل
نرم افزار دانلود
نرم افزار طراحي عکس
All In  http:///www.ir-softs.com]]></content:encoded>
		</item>
		<item>
			<title>خواهشمند است مرا در ساخت يك مدار منبع تغذيه 42ولتي dc راهنمايي فرماي</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=114</link>
			<pubDate>Sat, 19 Jul 2008 15:10:08 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=114</guid>
			<description><![CDATA[لطفاً مرا در ساخت يك مدار منبع تغذيه 42ولتي dc با جريان حدود3 تا 4 آمپر ، با ترانس يا بدون ترانس ولي رگوله شده راهنمايي فرماييد .
در ضمن تا حد ممكن ساده باشد . متشكرم:shy:]]></description>
			<content:encoded><![CDATA[لطفاً مرا در ساخت يك مدار منبع تغذيه 42ولتي dc با جريان حدود3 تا 4 آمپر ، با ترانس يا بدون ترانس ولي رگوله شده راهنمايي فرماييد .
در ضمن تا حد ممكن ساده باشد . متشكرم:shy:]]></content:encoded>
		</item>
		<item>
			<title>مبدل انالوگ به دیجیتالA/D</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=113</link>
			<pubDate>Mon, 07 Jul 2008 23:19:26 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=113</guid>
			<description><![CDATA[سلام
من می خواهم روی مبدل های انالوگ به دیجیتال کار کنم
اگر من را راهنمای کنید ممنون میشم
چه با معرفی کتاب مناسب چه باتوضیح در این بخش یا معرفی سایت مناسب ...
    مشخصا تبدیل انالوگ به دیجیتال 10بیتی                                                     
                                                        باتشکر]]></description>
			<content:encoded><![CDATA[سلام
من می خواهم روی مبدل های انالوگ به دیجیتال کار کنم
اگر من را راهنمای کنید ممنون میشم
چه با معرفی کتاب مناسب چه باتوضیح در این بخش یا معرفی سایت مناسب ...
    مشخصا تبدیل انالوگ به دیجیتال 10بیتی                                                     
                                                        باتشکر]]></content:encoded>
		</item>
		<item>
			<title>Proteus Virtual System Modelling 7.1 SP4</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=112</link>
			<pubDate>Mon, 30 Jun 2008 09:09:46 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=112</guid>
			<description><![CDATA[Proteus Virtual System Modelling 7.1 SP4

Proteus Virtual System Modelling (VSM) combines mixed mode SPICE circuit simulation, animated components and microprocessor models to facilitate co-simulation of complete microcontroller based designs. For the first time ever, it is possible to develop and test such designs before a physical prototype is constructed

This is possible because you can interact with the design using on screen indicators such as LED and LCD displays and actuators such as switches and buttons. The simulation takes place in real time (or near enough to it): a 300 MHz Pentium II can simulate a basic 8051 system clocking at over 12MHz. Proteus VSM also provides extensive debugging facilities including breakpoints, single stepping and variable display for both assembly code and high level language source

The VSM architecture allows additional animated models to be created by anyone, including end users. Whilst many types of animated model can be produced without resort to coding, a documented interface has been provided for developers to write their own models packaged as Windows DLLs. These models can implement purely electrical behaviour or combine this with graphical behaviour so that almost any kind of application specific peripheral can be simulated



Schematic Entry 

Proteus VSM uses our proven Schematic Capture software to provide the environment for design entry and development. ISIS is a long established product and combines ease of use with powerful editing tools. It is capable of supporting schematic capture for both simulation and PCB design. Designs entered in to Proteus VSM for testing can be netlisted for PCB layout either with our own PCB Design products or with third party PCB layout tools. ISIS also provides a very high degree of control over the drawing appearance, in terms of line widths, fill styles, fonts, etc. These capabilities are used to the full in providing the graphics necessary for circuit animation

Circuit Simulation 

At the heart of Proteus VSM is ProSPICE. This is an established product that combines uses a SPICE3f5 analogue simulator kernel with a fast event-driven digital simulator to provide seamless mixed-mode simulation. The use of a SPICE kernel lets you utilise any of the numerous manufacturer-supplied SPICE models now available and around 6000 of these are included with the package

Proteus VSM includes a number of virtual instruments including an Oscilloscope, Logic Analyser, Function Generator, Pattern Generator, Counter Timer and Virtual Terminal as well as simple voltmeters and ammeters. In addition, the simulator can display the logic state at every pin using coloured dots. This can be extremely useful when single stepping I/O code 



Should you wish to take detailed measurements on graphs, or perform other analysis types such as frequency, distortion, noise or sweep analyses of analogue circuits, you can purchase the Advanced Simulation Option. This option also includes Conformance Analysis - a unique and powerful tool for Software Quality Assurance 
Co-Simulation of Microcontroller Software 

The most exciting and important feature of Proteus VSM is its ability to simulate the interaction between software running on a microcontroller and any analog or digital electronics connected to it

The micro-controller model sits on the schematic along with the other elements of your product design. It simulates the execution of your object code (machine code), just like a real chip. If the program code writes to a port, the logic levels in circuit change accordingly, and if the circuit changes the state of the processor's pins, this will be seen by your program code, just as in real life.The VSM CPU models fully simulate I/O ports, interrupts, timers, USARTs and all other peripherals present on each supported processor. It is anything but a simple software simulator since the interaction of all these peripherals with the external circuit is fully modelled down to waveform level. VSM can even simulate designs containing multiple CPUs, since it is a simple enough matter to place two or more processors on a schematic and wire them together
Source Level Debugging 

Whilst Proteus VSM is already unique in its capabililty to run near real time simulations of complete micro-controller systems, its real power comes from its ability to perform these simulations in single step mode. This works just like your favourite software debugger, except that as you single step the code, you can observe the effect on the entire design - including all the electronics external to the microcontroller

VSM achieves this in a number of ways, dependent on the processor family and the tools that you are using. For detailed information on the third party compilers supported by Proteus VSM please see the Third Party Compilers page



Model Library 

In addition to the microprocessor models for each supported family, each Proteus VSM package includes a library of over 6000 device models such as

All manner of standard electronic components including resistors, capacitors, diodes, transistors, SCRs, op-couplers, op-amps, 555 timer etc., etc

74 series TTL and 4000 series CMOS devices

Memory devices including ROMs, RAMs EEPROMs, I2C device etc

Microprocessor support devices such as I/O ports and USARTs

The Proteus VSM library also contains a number of complex peripheral models including LED/LCD displays, matrix keypad, teletype terminal, DC motors, speaker/sounders and much more These models will allow you to interact with the software running on the simulated microcontroller, much as though you were working with a physical prototype



Animated Graphical LCD panel - this part sits directly on your schematic just like an ordinary component. When you run the simulation, the output from the simulated display controller chip is drawn directly on the screen

See the calculator picture, above, for further clarification of how the peripheral models work

Educational Use 

In addition to providing high quality Schematic Capture and PCB Layout for traditional computer aided design Proteus VSM is uniquely suited to teaching students about the design and operation of embedded systems solutions. For the first time a full virtual debugging interface is available in software, obviating the need for expensive hardware and allowing your students the freedom and flexibility to design and develop microcontroller solutions without the need for a physical prototype

Proteus Virtual System Modelling 7.1 SP4
Size: 41073 KB

http://rapidshare.com/files/71069162/Virtual_System.rar

Password 

bb.bearslinks.info

فايل رار داراي پسوورد هست ، در بالا اونو هم نوشتم ، فراموش نشه در صورت دنلود .

متشکرم ...]]></description>
			<content:encoded><![CDATA[Proteus Virtual System Modelling 7.1 SP4

Proteus Virtual System Modelling (VSM) combines mixed mode SPICE circuit simulation, animated components and microprocessor models to facilitate co-simulation of complete microcontroller based designs. For the first time ever, it is possible to develop and test such designs before a physical prototype is constructed

This is possible because you can interact with the design using on screen indicators such as LED and LCD displays and actuators such as switches and buttons. The simulation takes place in real time (or near enough to it): a 300 MHz Pentium II can simulate a basic 8051 system clocking at over 12MHz. Proteus VSM also provides extensive debugging facilities including breakpoints, single stepping and variable display for both assembly code and high level language source

The VSM architecture allows additional animated models to be created by anyone, including end users. Whilst many types of animated model can be produced without resort to coding, a documented interface has been provided for developers to write their own models packaged as Windows DLLs. These models can implement purely electrical behaviour or combine this with graphical behaviour so that almost any kind of application specific peripheral can be simulated



Schematic Entry 

Proteus VSM uses our proven Schematic Capture software to provide the environment for design entry and development. ISIS is a long established product and combines ease of use with powerful editing tools. It is capable of supporting schematic capture for both simulation and PCB design. Designs entered in to Proteus VSM for testing can be netlisted for PCB layout either with our own PCB Design products or with third party PCB layout tools. ISIS also provides a very high degree of control over the drawing appearance, in terms of line widths, fill styles, fonts, etc. These capabilities are used to the full in providing the graphics necessary for circuit animation

Circuit Simulation 

At the heart of Proteus VSM is ProSPICE. This is an established product that combines uses a SPICE3f5 analogue simulator kernel with a fast event-driven digital simulator to provide seamless mixed-mode simulation. The use of a SPICE kernel lets you utilise any of the numerous manufacturer-supplied SPICE models now available and around 6000 of these are included with the package

Proteus VSM includes a number of virtual instruments including an Oscilloscope, Logic Analyser, Function Generator, Pattern Generator, Counter Timer and Virtual Terminal as well as simple voltmeters and ammeters. In addition, the simulator can display the logic state at every pin using coloured dots. This can be extremely useful when single stepping I/O code 



Should you wish to take detailed measurements on graphs, or perform other analysis types such as frequency, distortion, noise or sweep analyses of analogue circuits, you can purchase the Advanced Simulation Option. This option also includes Conformance Analysis - a unique and powerful tool for Software Quality Assurance 
Co-Simulation of Microcontroller Software 

The most exciting and important feature of Proteus VSM is its ability to simulate the interaction between software running on a microcontroller and any analog or digital electronics connected to it

The micro-controller model sits on the schematic along with the other elements of your product design. It simulates the execution of your object code (machine code), just like a real chip. If the program code writes to a port, the logic levels in circuit change accordingly, and if the circuit changes the state of the processor's pins, this will be seen by your program code, just as in real life.The VSM CPU models fully simulate I/O ports, interrupts, timers, USARTs and all other peripherals present on each supported processor. It is anything but a simple software simulator since the interaction of all these peripherals with the external circuit is fully modelled down to waveform level. VSM can even simulate designs containing multiple CPUs, since it is a simple enough matter to place two or more processors on a schematic and wire them together
Source Level Debugging 

Whilst Proteus VSM is already unique in its capabililty to run near real time simulations of complete micro-controller systems, its real power comes from its ability to perform these simulations in single step mode. This works just like your favourite software debugger, except that as you single step the code, you can observe the effect on the entire design - including all the electronics external to the microcontroller

VSM achieves this in a number of ways, dependent on the processor family and the tools that you are using. For detailed information on the third party compilers supported by Proteus VSM please see the Third Party Compilers page



Model Library 

In addition to the microprocessor models for each supported family, each Proteus VSM package includes a library of over 6000 device models such as

All manner of standard electronic components including resistors, capacitors, diodes, transistors, SCRs, op-couplers, op-amps, 555 timer etc., etc

74 series TTL and 4000 series CMOS devices

Memory devices including ROMs, RAMs EEPROMs, I2C device etc

Microprocessor support devices such as I/O ports and USARTs

The Proteus VSM library also contains a number of complex peripheral models including LED/LCD displays, matrix keypad, teletype terminal, DC motors, speaker/sounders and much more These models will allow you to interact with the software running on the simulated microcontroller, much as though you were working with a physical prototype



Animated Graphical LCD panel - this part sits directly on your schematic just like an ordinary component. When you run the simulation, the output from the simulated display controller chip is drawn directly on the screen

See the calculator picture, above, for further clarification of how the peripheral models work

Educational Use 

In addition to providing high quality Schematic Capture and PCB Layout for traditional computer aided design Proteus VSM is uniquely suited to teaching students about the design and operation of embedded systems solutions. For the first time a full virtual debugging interface is available in software, obviating the need for expensive hardware and allowing your students the freedom and flexibility to design and develop microcontroller solutions without the need for a physical prototype

Proteus Virtual System Modelling 7.1 SP4
Size: 41073 KB

http://rapidshare.com/files/71069162/Virtual_System.rar

Password 

bb.bearslinks.info

فايل رار داراي پسوورد هست ، در بالا اونو هم نوشتم ، فراموش نشه در صورت دنلود .

متشکرم ...]]></content:encoded>
		</item>
		<item>
			<title>BASCOM-AVR BASIC COMPILER for the AVR family</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=111</link>
			<pubDate>Mon, 30 Jun 2008 08:52:30 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=111</guid>
			<description><![CDATA[کامپايلر باسکام براي اي وي آر

معرف حضورتون هست ... 

BASCOM-AVR BASIC COMPILER for the AVR family 

Features

Structured BASIC with labels 
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE 
Fast machine code instead of interpreted code 
Variables and labels can be as long as 32 characters 
Bit, Byte, Integer, Word, Long, Single and String variables 
Compiled programs work with all AVR microprocessors that have internal memory 
Statements are highly compatible with Microsoft’s VB/QB 
Special commands for LCD-displays , I2C chips and 1WIRE chips, PC keyboard, matrix keyboard, RC5 reception, software UART, SPI master and slave, IR remote code, graphical LCD's 
Local variables, user functions, library support 
Integrated terminal emulator 
Integrated ISP programmer , application note AVR910.ASM 
Perfectly matches the DT006 SimmStick 
DEMO version compiles 2KB of code. Well suited for the ATTINY2313 
Object file is ATMEL compatible. Use free AVR Studio from ATMEL website to simulate code 
Support for TCP/IP 



Bascom AVR 1.11.8.7 + crack
Size: 32890 KB

http://rapidshare.com/files/55928432/Bas...11.8.7.rar]]></description>
			<content:encoded><![CDATA[کامپايلر باسکام براي اي وي آر

معرف حضورتون هست ... 

BASCOM-AVR BASIC COMPILER for the AVR family 

Features

Structured BASIC with labels 
Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE 
Fast machine code instead of interpreted code 
Variables and labels can be as long as 32 characters 
Bit, Byte, Integer, Word, Long, Single and String variables 
Compiled programs work with all AVR microprocessors that have internal memory 
Statements are highly compatible with Microsoft’s VB/QB 
Special commands for LCD-displays , I2C chips and 1WIRE chips, PC keyboard, matrix keyboard, RC5 reception, software UART, SPI master and slave, IR remote code, graphical LCD's 
Local variables, user functions, library support 
Integrated terminal emulator 
Integrated ISP programmer , application note AVR910.ASM 
Perfectly matches the DT006 SimmStick 
DEMO version compiles 2KB of code. Well suited for the ATTINY2313 
Object file is ATMEL compatible. Use free AVR Studio from ATMEL website to simulate code 
Support for TCP/IP 



Bascom AVR 1.11.8.7 + crack
Size: 32890 KB

http://rapidshare.com/files/55928432/Bas...11.8.7.rar]]></content:encoded>
		</item>
		<item>
			<title>Proteus VSM 7.2 SP2 - نقشه شماتيک ، مدار چاپي ، آناليز و شبيه سازي مدار</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=110</link>
			<pubDate>Mon, 30 Jun 2008 08:35:43 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=110</guid>
			<description><![CDATA[با اين ميتونيد نقشه شماتیک ، مدار چاپی و از همه مهمتر آنالیز و شبیه سازی مدار را انجام بديد ... از دیگر خصوصیات بارز اون پشتیبانی از ای سی های میکرو کنترلر هست به صورتی که شما برنامه ای رو که نوشتين رو در proteus لود میکنید و سخت افزار رو هم به صورت مجازی میبندین و از کارکرد مدار خود مطلع میشين .

Proteus is a package for electronics engineers. It includes simulating, drawing schematics, and PCB layouts

Schematic



The new version of Proteus even includes 3D visualization



3D models




Proteus VSM 7.2 SP2 + Crack
Size: 52 MB

http://rapidshare.com/files/82949233/Pro...o.rar.html

لينکه ديگه اي براي دنلودش ميذارم :

PROTEUS 7.2 SP2 V1.4 FULL - Crack Included

http://rapidshare.com/files/120972099/pr..._cosar.rar

موفق باشيد]]></description>
			<content:encoded><![CDATA[با اين ميتونيد نقشه شماتیک ، مدار چاپی و از همه مهمتر آنالیز و شبیه سازی مدار را انجام بديد ... از دیگر خصوصیات بارز اون پشتیبانی از ای سی های میکرو کنترلر هست به صورتی که شما برنامه ای رو که نوشتين رو در proteus لود میکنید و سخت افزار رو هم به صورت مجازی میبندین و از کارکرد مدار خود مطلع میشين .

Proteus is a package for electronics engineers. It includes simulating, drawing schematics, and PCB layouts

Schematic



The new version of Proteus even includes 3D visualization



3D models




Proteus VSM 7.2 SP2 + Crack
Size: 52 MB

http://rapidshare.com/files/82949233/Pro...o.rar.html

لينکه ديگه اي براي دنلودش ميذارم :

PROTEUS 7.2 SP2 V1.4 FULL - Crack Included

http://rapidshare.com/files/120972099/pr..._cosar.rar

موفق باشيد]]></content:encoded>
		</item>
		<item>
			<title>high voltage</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=109</link>
			<pubDate>Tue, 24 Jun 2008 11:39:33 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=109</guid>
			<description><![CDATA[ولتاژ را در خطوط انتقال براي كاهش تلفات توان بالا ميبرند براي اينكه  با افزايش ولتاژ جريان پايين مي آيدوطبق فرمول p=ri^2 توان كم ميشو د اما مطابق فرمول p=v^2/r  باافزايش ولتاژ توان نيز بالا ميرود لطفا راهنمايي فرماييد.]]></description>
			<content:encoded><![CDATA[ولتاژ را در خطوط انتقال براي كاهش تلفات توان بالا ميبرند براي اينكه  با افزايش ولتاژ جريان پايين مي آيدوطبق فرمول p=ri^2 توان كم ميشو د اما مطابق فرمول p=v^2/r  باافزايش ولتاژ توان نيز بالا ميرود لطفا راهنمايي فرماييد.]]></content:encoded>
		</item>
		<item>
			<title>فلاشر ساده</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=108</link>
			<pubDate>Fri, 20 Jun 2008 01:51:18 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=108</guid>
			<description><![CDATA[درود 
اینم از دزدی اخرمون ! ( خدایا مرا ببخش !!)
برید حال کنید !
http://www.parsaupload.com/file/1702/MET...R-pdf.html
بدرود]]></description>
			<content:encoded><![CDATA[درود 
اینم از دزدی اخرمون ! ( خدایا مرا ببخش !!)
برید حال کنید !
http://www.parsaupload.com/file/1702/MET...R-pdf.html
بدرود]]></content:encoded>
		</item>
		<item>
			<title>الارمی کوچک و بسیار ساده</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=107</link>
			<pubDate>Fri, 20 Jun 2008 01:48:31 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=107</guid>
			<description><![CDATA[درود 
خیلی جاها یک الارم که خیلی ساده ساخته می شه ضروری 
امیدوارم استفاده کنید .
http://www.parsaupload.com/file/1700/MET...--pdf.html
بدرود]]></description>
			<content:encoded><![CDATA[درود 
خیلی جاها یک الارم که خیلی ساده ساخته می شه ضروری 
امیدوارم استفاده کنید .
http://www.parsaupload.com/file/1700/MET...--pdf.html
بدرود]]></content:encoded>
		</item>
		<item>
			<title>ساخت امپلی فایر قدرتمند</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=106</link>
			<pubDate>Fri, 20 Jun 2008 01:44:35 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=106</guid>
			<description><![CDATA[درود 
فایل پی دی اف جالبی که در اون اموزش ساخت امپلی قوی بود رو برای شما 
قرار دادم  امیدوارم لذت ببرید .
سبک و اسان !
http://parsaupload.com/file/1699/METAL-G...P-pdf.html
بدرود]]></description>
			<content:encoded><![CDATA[درود 
فایل پی دی اف جالبی که در اون اموزش ساخت امپلی قوی بود رو برای شما 
قرار دادم  امیدوارم لذت ببرید .
سبک و اسان !
http://parsaupload.com/file/1699/METAL-G...P-pdf.html
بدرود]]></content:encoded>
		</item>
		<item>
			<title>تقاضا برای ایجاد بخش تعمیرات !</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=105</link>
			<pubDate>Thu, 19 Jun 2008 03:47:23 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=105</guid>
			<description><![CDATA[درود 
انگار اینجا هر چند هزار سال یه بار اپدیت می شه ! ( معذرت ها !!)
می خواستم از مدیر محترم خواهش کنم بخشی رو در تالارهای اصلی 
به تعمیرات اختصاص بدین .
همچنین ایجاد بخشی برای کامپیوتر و مباحث مربوط .]]></description>
			<content:encoded><![CDATA[درود 
انگار اینجا هر چند هزار سال یه بار اپدیت می شه ! ( معذرت ها !!)
می خواستم از مدیر محترم خواهش کنم بخشی رو در تالارهای اصلی 
به تعمیرات اختصاص بدین .
همچنین ایجاد بخشی برای کامپیوتر و مباحث مربوط .]]></content:encoded>
		</item>
		<item>
			<title>نرم افزار کرو کلیپ ( طراحی مجازی )</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=104</link>
			<pubDate>Wed, 18 Jun 2008 02:14:35 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=104</guid>
			<description><![CDATA[درود 
نرم افزار کرو کلیپ یکی از نرم افزار های پایه برای افراد مبتدی در الکترونیک می باشد
به کمک این نرم افزار شما مدارهای ساده ی خود را بدون دردسر ترکیب ، عیب یابی 
و بررسی می کنید.
http://parsaupload.com/file/1597/CROCCLI...--rar.html
امیدوارم بدردتون بخوره . و اگه مثل من بدبخت بدنبال سایت برای اپلود گشتید 
این سایت خداست ! ( قابل توجه مدیران عزیز مغزم کپک زد از بس با این 
اپلود سنترتون ور رفتم و به جایی نرسیدم ! )
http://parsaupload.com
درپناه اهورا
بدرود.]]></description>
			<content:encoded><![CDATA[درود 
نرم افزار کرو کلیپ یکی از نرم افزار های پایه برای افراد مبتدی در الکترونیک می باشد
به کمک این نرم افزار شما مدارهای ساده ی خود را بدون دردسر ترکیب ، عیب یابی 
و بررسی می کنید.
http://parsaupload.com/file/1597/CROCCLI...--rar.html
امیدوارم بدردتون بخوره . و اگه مثل من بدبخت بدنبال سایت برای اپلود گشتید 
این سایت خداست ! ( قابل توجه مدیران عزیز مغزم کپک زد از بس با این 
اپلود سنترتون ور رفتم و به جایی نرسیدم ! )
http://parsaupload.com
درپناه اهورا
بدرود.]]></content:encoded>
		</item>
		<item>
			<title>اپلود سایت کار نمی کنه !!</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=103</link>
			<pubDate>Wed, 18 Jun 2008 01:56:10 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=103</guid>
			<description><![CDATA[بیست باره که دارم اپ می کنم ولی موقعی که نگاه می کنم می نویسه 0 !
کمک کنید .]]></description>
			<content:encoded><![CDATA[بیست باره که دارم اپ می کنم ولی موقعی که نگاه می کنم می نویسه 0 !
کمک کنید .]]></content:encoded>
		</item>
		<item>
			<title>سنسور لرزش</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=101</link>
			<pubDate>Thu, 12 Jun 2008 15:21:22 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=101</guid>
			<description><![CDATA[سلام و خسته نباشید

من دنبال یه سنسوری هستم که با اون بتونم لرزش رو با میکرو سنس کنم . میخوام میزان لرزش رو بگیرم یعنی مثلا اگه لرزش از 1 ریشتر ( ببخشید واحد لرزش رو نمی دونم چیه :P ) تا 3 ریشتر بود چراغ یک روشن بشه . اگه از 3 تا 5 بود چراغ 2 و یه همچین چیزی.

توی برنامه نویسیش فعلا مشکلی ندارم ! اگه سنسورش رو بتونین بهم معرفی کنید یا یه سایتی مرجعی چیزی که سنسور ها رو با کاتالوگش توش معرفی کرده باشه ممنون می شم.]]></description>
			<content:encoded><![CDATA[سلام و خسته نباشید

من دنبال یه سنسوری هستم که با اون بتونم لرزش رو با میکرو سنس کنم . میخوام میزان لرزش رو بگیرم یعنی مثلا اگه لرزش از 1 ریشتر ( ببخشید واحد لرزش رو نمی دونم چیه :P ) تا 3 ریشتر بود چراغ یک روشن بشه . اگه از 3 تا 5 بود چراغ 2 و یه همچین چیزی.

توی برنامه نویسیش فعلا مشکلی ندارم ! اگه سنسورش رو بتونین بهم معرفی کنید یا یه سایتی مرجعی چیزی که سنسور ها رو با کاتالوگش توش معرفی کرده باشه ممنون می شم.]]></content:encoded>
		</item>
		<item>
			<title>سوالاتي در باره جاوا</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=100</link>
			<pubDate>Wed, 11 Jun 2008 17:31:49 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=100</guid>
			<description><![CDATA[مي خواستم بدونم جاوا براي برنامه نويسي سيستمهاي كنترل از راه دور خوب هست يانه؟

هدف من ساخت يك ماشين كنترل ازراه دوره كه به يك دوربين مجهزه و از طريق لپ تاپ كنترل ميشه.

به اين دليل درمورد جاوا پرسيدم چون  سايت جاوا sun.java.com مدعي شده كه در مريخ نورد ناسا از زبان جاوا كمك گرفته شده.]]></description>
			<content:encoded><![CDATA[مي خواستم بدونم جاوا براي برنامه نويسي سيستمهاي كنترل از راه دور خوب هست يانه؟

هدف من ساخت يك ماشين كنترل ازراه دوره كه به يك دوربين مجهزه و از طريق لپ تاپ كنترل ميشه.

به اين دليل درمورد جاوا پرسيدم چون  سايت جاوا sun.java.com مدعي شده كه در مريخ نورد ناسا از زبان جاوا كمك گرفته شده.]]></content:encoded>
		</item>
		<item>
			<title>درایو موتور براش لس</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=99</link>
			<pubDate>Wed, 11 Jun 2008 10:01:49 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=99</guid>
			<description><![CDATA[سلام من می خوام از موتور براش لس استفاده کنم. ولی چون قبلا از اون استفاده نکردم می خواستم بپرسم آیا نحوه ی درایوش متفاوته با موتور براش یا نه اگر متفاوته چجوری میشه راهش انداخت؟ یا اگه درایور خاصی داره لطفا معرفی کنید.]]></description>
			<content:encoded><![CDATA[سلام من می خوام از موتور براش لس استفاده کنم. ولی چون قبلا از اون استفاده نکردم می خواستم بپرسم آیا نحوه ی درایوش متفاوته با موتور براش یا نه اگر متفاوته چجوری میشه راهش انداخت؟ یا اگه درایور خاصی داره لطفا معرفی کنید.]]></content:encoded>
		</item>
		<item>
			<title>پروتکلهای مانیتور</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=98</link>
			<pubDate>Sun, 08 Jun 2008 22:47:50 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=98</guid>
			<description><![CDATA[سلام به همه دوستان
من میخوام از مانیتور کامپیوتر یا تلوزیون جهت نمایش یه سری داده استفاده کنم . یعنی یه مداری طراحی کنم که با مانیتور یا تلوزیون  ارتباط برقرار کنه . از کجا میتونم اطلاعات لازم رو بدست بیارم ؟ یه دنیا ممنون :rolleyes::P]]></description>
			<content:encoded><![CDATA[سلام به همه دوستان
من میخوام از مانیتور کامپیوتر یا تلوزیون جهت نمایش یه سری داده استفاده کنم . یعنی یه مداری طراحی کنم که با مانیتور یا تلوزیون  ارتباط برقرار کنه . از کجا میتونم اطلاعات لازم رو بدست بیارم ؟ یه دنیا ممنون :rolleyes::P]]></content:encoded>
		</item>
		<item>
			<title>به یک نویسنده کمکی در وبلاگ نیاز دارم...</title>
			<link>http://forum.iranmedar.com/showthread.php?tid=97</link>
			<pubDate>Fri, 06 Jun 2008 18:49:59 +0400</pubDate>
			<guid isPermaLink="false">http://forum.iranmedar.com/showthread.php?tid=97</guid>
			<description><![CDATA[مشخصات من: مهرداد احمدپور-سوم دبیرستان رشته فنی الکترونیک-ساکن فارس
ایمیل:ایمیل من
وبلاگ من:آدرس وبلاگم]]></description>
			<content:encoded><![CDATA[مشخصات من: مهرداد احمدپور-سوم دبیرستان رشته فنی الکترونیک-ساکن فارس
ایمیل:ایمیل من
وبلاگ من:آدرس وبلاگم]]></content:encoded>
		</item>
	</channel>
</rss>